PLLC UPB Appliance Dimmer Module are a 250 Watt 240 Volt 50 Hz device. Suitable for controlling 3rd part devices e.g. Electric Blanket….Fan…etc  …see list below of 3rd part device wattages to be used as a guide only. Care should be taken to confirm your device Wattage usage.


..”ENSURE THAT YOUR UPB APPLIANCE DIMMER MODULE IS SET TO SNAP ON AND SNAP OFF”…THIS IS CRITICAL!.

For control “OFF and ON” of devices which have a higher wattage than 250 watts, it is recommended that a PLLC UPB Appliance Relay is used….see section under “Appliance Relay”

 

APPLIANCE WATTAGE UPB Appliance Dimmer Yes/No
Aquarium 80 YES
Clock radio 10 YES
Coffee Maker 1050 NO
Washing Machine 425 NO
Cloths Dryer 3400 NO
Dishwasher 1800 NO
dehumidifier 785 NO
Electric Blanket single 60 YES
Electric Blanket double 100 YES
Ceiling Fan 120 YES
Fan 153 YES
Hair Dryer 1538 NO
Heater 1125 NO
Cloths Iron 1400 NO
Heater 1125 NO
Microwave Oven 925 NO
Refrigerator 725 NO
Television 19" 110 YES
Television 27" 113 YES
Television 36" 133 YES
Television (51- 61) 170 YES
Television Flat screen ) 120 YES
Toaster 1100 NO
Toaster Oven 1225 NO
VCR 19 YES
DVD 23 YES
Vacuum Cleaner 1220 NO
Water Heater 5000 NO
Water Pump 675 NO
Water Bed (w/heater) 250 YES
computer 270 NO
Radio 400 NO

Prior to placing in Setup Mode, it is recommended to always “Default” the unit.
1.    Press the UP Button 5 times…. LED begins to flash GREEN …
2.    Press the DOWN button 10 times… LED now starts to Flash RED
3.    Then Press the UP button 2 times…LED stops flashing….the Unit has now be defaulted
4.    Now place to unit in Setup Mode …Press UP button 5 times, to put device into Setup Mode….LED starts flashing GREEN
5.    By using the UPSTART Software, downloaded from the PLLC Web site, you can now discover your UPB device and place or create your NEW Network

6.    The UPSTART Wizard can provide a Step by Step procedure for installation

 

 

Home Products Dimmers Appliance Dimmers